Electrical Box Type Busbar System

The provided Box Type Busbar System use profiles to lessen the skin impact. Contingent on the electrical recurrence of the AC voltage, because of skin impact the AC current is prone to stream close to the conductors surface. Thus, regions of the busbar with low current thickness can be expelled; accordingly, sparing cost and weight. As the recurrence of the AC voltage enhances, the skin profundity decreases. Utilizing Box Type Busbar System lessens the impact of skin profundity by advancing the areas of lower and higher current thickness as well as accomplishing better performance in any condition, while using less weight than level busbars. Besides, current density can be consistently spread over the cross segment of the profile. Our Box Type Busbar System is comprised of exceptionally electrically conductive sheet metal. It can be utilized in a wide range of Industrial facilities, Structures, Shopping centers, Air terminals and so forth.

Specification

• Rail Length [mm]: 4.000
• Outside-Dimensions of bar profile: 2.20" x 3.54" (56.0 mm x 90,0 mm)
• Support Spacing: 6.56 ft (2 meters)
• Operating Conditions: For indoor and outdoor applications
• Track Configuration: Straight course; curve segments available by request
• Current Range : 40 Amps, 60 Amps, 80 Amps, 100 Amps, 120 Amps, 140 amps, 160 Amps, 180 Amps, 200 Amps
• Maximum Running Speed: 278.9 feet/minute (85 meters/minute)

Electrical properties:

• Max. Voltage(V): 600
• Rail Length [mm]: 4.000
• Conductor cross section(mm2): 10 - 16 - 25 - 35 - 50
• Resistance( /km): 1.656 - 1.137- 0.713 - 0.522 - 0.337
• Leakage resistance: CTI600-2, 7
• Dielectric strength: 30-40KV/mm
• Track Configuration: Straight course / Curve segments on request ( R 1.2m )

Mechanical properties:

• Flexible strength: 75N/mm2+ 10%
• Tensile strength: 40N/mm2+ 10%

Temperature range: 

• Common Housing: -30^oC up to +60^oC
• BAYBLEND Housing: -20^oC up to +115^oC